Tektronix AD007 Manuale Utente Scaricare il pdf (Pagina 42)

Getting Started

AD007 User Manual

To connect the AD007 GPIB-LAN Adapter to the GPIB, do these

steps:

1. Connect the GPIB port of the adapter to the GPIB port(s) or

connector(s) for the instrument(s) that you wish to control. If

necessary, use the GPIB connector hardware provided. (See

Figure 8.)

129-1502-00

GPIB cable

GPIB port on

instrument

Figure 8: Connecting to the GPIB

2. Turn on all devices connected to the GPIB. Wait for all power on

routines to finish.

3. Access the web page on the AD007 adapter.

4. Click GPIB C ommunications.

5. Click Poll to refresh the list of active talk/listen instruments.

6. Verify that the devices on the bus are listed.

7. If you change which devices are active on the bus or device

parameters, click Poll to rediscover the active addresses on the

GPIB.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

Nessun commento

Tektronix AD007 Manuale Utente Pagina 42